K16 PLL Module

Programmable Clock Synthesizer, Multiplier, and Divider
  • Generates up to seven output clocks from a single input frequency
  • Each output may be programmed in-system for any clock frequency up to 230 MHz, using up to three independent configurable PLLs
  • Input accepts an external crystal or LVCMOS clock signal. If an external crystal is used, an on-chip load capacitor is adequate for most applications
  • Value of the load capacitor is programmable from 0 to 20 pF
  • An on-chip VCXO is selectable, which allows synchronization of the output frequency to an external control (PWM) signal
$69.00

  • High-performance, Programmable Clock Synthesizer, Multiplier, and Divider

    • Generates up to three output clocks from a single input frequency
    • Each output may be programmed in-system for any clock frequency up to 230 MHz, using up to three independent configurable PLLs
    • Input accepts an external crystal or LVCMOS clock signal. If an external crystal is used, an on-chip load capacitor is adequate for most applications
    • Value of the load capacitor is programmable from 0 to 20 pF
    • An on-chip VCXO is selectable, which allows synchronization of the output frequency to an external control (PWM) signal
    • Absolute Maximum Ratings Min Max Unit
      MikroBUS
      +5V Supply voltage -0.5 5.5 V
      +3.3V -0.5 5.5 V

       

      Recommended Operating Conditions Min Max Unit
      MikroBUS
      +5V Supply voltage 4.0 5.5 V
      +3.3V 2.7 5.5 V

       

      Parameter
      Test Condition
      Min
      Typ
      Max
      Unit
      ICC 3.3V - 5.0V 15 60 mA

       

      Parameter Test Conditions Min Typ Max Unit
      UFL, SMA

      VO

      Output Voltage

      		 0 - C_VCC V

      Parameter Test Conditions Min Max Unit

      UFL, SMA
      VOL  IOL = 9 mA C_VCC = 3.3V 0.55 V
      IOL = 10mA C_VCC = 5.0V 0.55
      VOH IOH = -9mA C_VCC = 3.3V 2.4 V
      IOH = -10mA C_VCC = 5.0V 3.3
      FO C_VCC = 3.3V 80 210 MHz
      C_VCC = 5.0V 80 230 MHz
      LPLL




      		 Phase noise, PLL





      10 Hz

      		 TDB










      		 dBc/Hz
      100 Hz dBc/Hz
      1 kHz dBc/Hz
      10 kHz dBc/Hz
      100 kHz dBc/Hz
      1 MHz dBc/Hz

       

      Parameter Test Conditions Min Typ Max Unit
      REF
      FREF Input frequency 10 32 MHz
      VIL 0 V
      VIH 1.8 5 V
      PREF Input power 5MHz - 32MHz 10 20 dBm

    • File
      Type
      Last Updated
       K16 Schematics       		PDF 2020/05/14
       K16 Block Diagram PDF 2020/09/01
       K16 Detail Drawing       		PDF 2022/08/29
       K16 STEP Model       		ZIP(STEP) 2022/08/29
    • K16 PLL Module
    • K16 PLL Module
    • K16 PLL Module

    K16 PLL Module

    Programmable Clock Synthesizer, Multiplier, and Divider
    • Generates up to seven output clocks from a single input frequency
    • Each output may be programmed in-system for any clock frequency up to 230 MHz, using up to three independent configurable PLLs
    • Input accepts an external crystal or LVCMOS clock signal. If an external crystal is used, an on-chip load capacitor is adequate for most applications
    • Value of the load capacitor is programmable from 0 to 20 pF
    • An on-chip VCXO is selectable, which allows synchronization of the output frequency to an external control (PWM) signal
    $69.00

    • High-performance, Programmable Clock Synthesizer, Multiplier, and Divider

      • Generates up to three output clocks from a single input frequency
      • Each output may be programmed in-system for any clock frequency up to 230 MHz, using up to three independent configurable PLLs
      • Input accepts an external crystal or LVCMOS clock signal. If an external crystal is used, an on-chip load capacitor is adequate for most applications
      • Value of the load capacitor is programmable from 0 to 20 pF
      • An on-chip VCXO is selectable, which allows synchronization of the output frequency to an external control (PWM) signal
      • Absolute Maximum Ratings Min Max Unit
        MikroBUS
        +5V Supply voltage -0.5 5.5 V
        +3.3V -0.5 5.5 V

         

        Recommended Operating Conditions Min Max Unit
        MikroBUS
        +5V Supply voltage 4.0 5.5 V
        +3.3V 2.7 5.5 V

         

        Parameter
        Test Condition
        Min
        Typ
        Max
        Unit
        ICC 3.3V - 5.0V 15 60 mA

         

        Parameter Test Conditions Min Typ Max Unit
        UFL, SMA

        VO

        Output Voltage

        		 0 - C_VCC V

        Parameter Test Conditions Min Max Unit

        UFL, SMA
        VOL  IOL = 9 mA C_VCC = 3.3V 0.55 V
        IOL = 10mA C_VCC = 5.0V 0.55
        VOH IOH = -9mA C_VCC = 3.3V 2.4 V
        IOH = -10mA C_VCC = 5.0V 3.3
        FO C_VCC = 3.3V 80 210 MHz
        C_VCC = 5.0V 80 230 MHz
        LPLL




        		 Phase noise, PLL





        10 Hz

        		 TDB










        		 dBc/Hz
        100 Hz dBc/Hz
        1 kHz dBc/Hz
        10 kHz dBc/Hz
        100 kHz dBc/Hz
        1 MHz dBc/Hz

         

        Parameter Test Conditions Min Typ Max Unit
        REF
        FREF Input frequency 10 32 MHz
        VIL 0 V
        VIH 1.8 5 V
        PREF Input power 5MHz - 32MHz 10 20 dBm

      • File
        Type
        Last Updated
         K16 Schematics         		PDF 2020/05/14
         K16 Block Diagram PDF 2020/09/01
         K16 Detail Drawing         		PDF 2022/08/29
         K16 STEP Model         		ZIP(STEP) 2022/08/29